|
|
 |
|
 |
 |
|
XM-2302G
|
 |
|
|
|
|
|
XM-2302G is Dual 1000Mbps ports with pluggable SFP connectors.
Optimized testing include Validate the functionality and performance of
network and networking devices at various speed and load conditions and
Perform deterministic and repeatable tests from layer 2 to layer 7 for
the most accurate test results.
|
|
|
|
- Interface types:
- XM-2302G: Dual 1000Mbps ports with pluggable SFP connectors
- Traffic generation and analysis capabilities:
- Wirespeed generation and analysis of layer 2 ~ 3 packets
- Synchronous generation and analysis of layer 4 ~ 7 packets
- Single / Burst / Multi-burst / Continuous packet generation
- Generation of packets for various protocols including IPv4, IPv6, IGMP, MPLS, VLAN, and OSPF etc.
- Multi-streams: up to 2048 streams can be generated and analyzed on per port basis
- Insertion: additional packets can be configured and mixed in with the standard
traffic.
- Capturing capabilities:
- Buffer size: 32MB per port
- Full protocol decode suite supported by NuStreams Window
- Capture Triggers: 8 triggers per port with support for logical operation including AND, OR, XOR, etc
- Trigger state: 4 trigger states per port for identifying packets appear in specific order
- Latency measurement resolution: 40ns
- X-Trailer® for frame integrity verification and sequence checking
|
|
|
|
- Optimized testing:
- Validate the functionality and performance of network and networking devices at various speed and load conditions
- Perform deterministic and repeatable tests from layer 2 to layer 7 for the most accurate test results
- Extensive statistics and reports:
- Real-time 64-bit counters that provide detailed statistics about every aspect of the packet being transmitted / received
- Automatic generation of test results in
graphical and/or tabular formats within the NuStreams applications; the
results can be exported to other applications
- Wide-ranging of software support for interactive and/or automated tests
- Cost effective
|
|
|
|
- NuStreams Window (for interactive functional testing)
- Switch Genius (for RFC2889 and RFC2285 tests)
- NuApplications (for RFC1242 and RFC2544 tests)
- NuAPI (Application Programming Interface) for C, C++ and TCL/TK
|
|
|
|

|
- Model No.: XM-2302G
- Standard: IEEE 802.3
- Interface: Pluggable SFP x 2 (ordered separately)
- Speed and Duplex Mode: 1000Mbps: Full Duplex Only
- Preamble: 4 ~ 16 Bytes
- Frame Length: 40 ~ 16, 384 Bytes (without CRC); Fixed / Increment / Decrement / Random / Loop
- Transmit Mode: Continuous, Single burst, Multi burst
- Inter-frame Gap: 96 nSec. ~ 1 Sec. Unit: Packets/Sec,
%Utilization, Random, Databits/Sec, Frame bits/Sec, Total bits/Sec,
nSec, uSec, mSec, Sec
- Data Pattern: All zeros, All ones, Custom, Random, IP, UDP,
UDP-RTP, TCP, ARP, RARP, ICMP, IPX, Pause, 555, AAAA, Incrementing
byte, Incrementing word, Decrementing byte, Decrementing word, F0F0,
0F0F, FF00, FFFF0000, 0000FFFF, 8-F's 8-0's, 8-0's 8-F's
- Error Generation: CRC Error, Alignment Error, Dribble Error, IP Checksum Error, Undersize, Oversize, TCP Checksum
- Collision Generation: Single Collision / Multiple Collision / Excess Collision / Forced Collision
- Multi-Streams: Up to 2048 streams; Up to 16 user definable
variable fields are provided to each stream to maximize the flexibility
of stream generation
- Data Integrity Verification / Sequence Checking: Yes
- Source / Destination MAC Address: 48 bits Fixed / Increment / Decrement / Random
- Source / Destination IP Address: Fixed / Increment / Decrement / Random
- IPv4 / IPv6 Support: Yes
- VLAN Stacking: Up to 8 VLAN Tags
- MPLS (Label / COS / TTL Field): Fixed / Increment / Decrement / Random (Up to 2 stack labels)
- Hardware Counters: Rx Frames, Rx Bytes, Undersize, Oversize,
Size Between, Broadcast, Multicast, Unicast, Pause, VLAN, MPLS, IPv4,
IPv6, CRC Error, Alignment Error, Dribble Error, DI Checksum Error,
Serial No. Error, IP Checksum Error, TCP Checksum Error, UDP Checksum
Error, Rx ARP Requests, Rx ARP Replies, Rx ICMP Requests, Rx ICMP
Replies, RxUDF 0 ~ 7, Rx UDF Trigger, Tx Frames, Tx Bytes, Total
Collision, Single Collision, Multi-Collision, Excess Collision, Tx
Trigger, Tx Queue, Tx ARP Requests, Tx ARP Replies
- Capture Buffer Size: 32MB per port
- Capture Mode: All Frames, Size Smaller Than, Size in Between,
Size Larger Than, Alignment Error, Dribble Error, CRC Error, Serial No.
Error, Date Integrity Error, RxUDF
- RxUDF: Four 6-byte triggers and four 4-byte triggers per port
with support for logical operations such as AND, OR, XOR, etc.; Four
trigger states are provided for locating packets appear in specific
order.
- QoS Testing: Up to 8 Priority Queues
- Line Performance: Wire Speed
- Hardware Requirement: NuStreams-2000 or NuStreams-600 Chassis
| |
|
|
|
|
 |
 |
|
 |
|
|
|
|
|