XM-2801 is 1 x 10Gbps port with XFP connector and 2 x SMA connectors for triggering external devices. Optimized testing include Validate the functionality and performance of network and networking devices at various speed and load conditions etc.

• 1 x 10Gbps port with XFP connector
• 2 x SMA connectors for triggering external devices

• Traffic generation and analysis capabilities:
  • Wirespeed generation and analysis of layer 2 ~ 3 packets
  • Synchronous generation and analysis of layer 4 ~ 7 packets
  • Single / Burst / Multi-burst / Continuous packet generation
  • Generation of packets for various protocols including IPv4, IPv6,IGMP, MPLS, VLAN, and OSPF etc.
  • Multi-streams: up to 2048 streams can be generated and analyzed
  • Insertion: additional packets can be configured and mixed in with the standard traffic.

• Capturing capabilities:
  • Buffer size: 64MB
  • Full protocol decode suite supported by NuStreams Window
  • Capture Triggers: 8 triggers with support for logical operation including AND, OR, XOR, etc.
  • Trigger state: 4 trigger states for identifying packets that appear in specific order
• Latency measurement resolution: 20ns
• X-Trailer® for data integrity verification and sequence checking

• Wirespeed generation and analysis of packets at speed up to 10Gbps
• Optimized testing
  • Validate the functionality and performance of network and networking devices at various speed and load conditions
  • Perform deterministic and repeatable layer 2 to layer 7 tests for the most accurate test results
• Extensive statistics and reports
  • Real-time 64-bit counters that provide detailed statistics about every aspect of the packets being transmitted / received
  • Automatic generation of test results in graphical and/or tabular formats within the NuStreams software suites; the results can be exported to other applications
• Wide-ranging of software support for interactive and/or automated tests

• NuStreams Window (for interactive functional testing)
• Switch Genius (for RFC2889 and RFC2285 tests)
• NuApplications (for RFC1242 and RFC2544 tests)
• NuFlow (for Layer 2 & 3 QoS tests)
• NuAPI (Application Programming Interface) for C, C++ and TCL/TK

• Model No.: XM-2801
• Standard: IEEE 802.3ae-compliant 10GBASE-R (LAN)
• Interface: Pluggable XFP (ordered separately) and 2 SMA Connectors
• Speed and Duplex Mode: 10Gbps / Full Duplex Only
• Preamble: 8 Bytes (Fixed)
• Frame Length: 40 ~ 16,384 Bytes (without CRC); Fixed / Increment / Decrement / Random / Loop
• Transmit Mode: Single / Burst / Multi Burst / Continuous
• Inter-frame Gap: 9.6 nSec. ~ 1.073 Sec. Unit: Packets/Sec, %Utilization, Random, Databits/Sec, Frame bits/Sec, Total bits/Sec, nSec, uSec, mSec, Sec
• Data Pattern: All zeros, All ones, Custom, Random, IP, UDP, UDP-RTP, TCP, ARP, RARP, ICMP, IPX, Pause, 555, AAAA, Incrementing byte, Incrementing word, Decrementing byte, Decrementing word, F0F0, 0F0F, FF00, FFFF0000, 0000FFFF, 8-F's 8-0's, 8-0's 8-F's
• Error Generation: CRC Error, IP Checksum Error, Undersize, Oversize, TCP Checksum Error
• Collision Generation: N/A
• Multi-Streams: Up to 2048 streams; Up to 16 user definable variable fields are provided to each stream to maximize the flexibility of stream generation
• Data Integrity Verification/ Sequence Checking: Yes
• Source / Destination MAC Address: 48 bits Fixed / Increment / Decrement / Random
• Source / Destination IP Address: Fixed / Increment / Decrement / Random
• IPv4 / IPv6 Support: Yes
• VLAN Stacking: Up to 8 VLAN Tags
• MPLS (Label / COS / TTL Field): Fixed / Increment / Decrement / Random (Up to 2 stack labels)
• Hardware Counters: Rx Frames, Rx Bytes, Undersize, Oversize, Size Between, Broadcast, Multicast, Unicast, Pause, VLAN, MPLS, IPv4,
• IPv6, CRC Error, DI Checksum Error, Serial No. Error, IP Checksum Error, TCP Checksum Error, UDP Checksum Error, Rx ARP Requests, Rx ARP Replies, Rx ICMP Ping Requests, Rx ICMP Ping Replies, RxUDF 0 ~ 7, Rx UDF Trigger, Tx Frames, Tx Bytes, Tx Trigger, Tx Queue, Tx ARP Requests, Tx ARP Replies
• Capture Buffer Size: 64MB
• Capture Mode: All Frames, Size Smaller Than, Size in Between, Size Larger Than, CRC Error, Serial No. Error, Data Integrity Error, RxUDF
• RxUDF: Four 6-byte triggers and four 4-byte triggers per port with support for logical operations such as AND, OR, XOR, etc.; Four trigger states are provided for locating packets that appear in specific order.
• QoS Testing: Up to 8 Priority Queues
• Line Performance: 10.3125 Gbps
• Hardware Requirement: NuStreams-2000 or NuStreams-600 Chassis