XM-28L1 is 1 x 10Gbps port with XFP connector for triggering external devices. Optimized testing include Validate the functionality and performance of network and networking devices at various speed and load conditions etc.

• Interface type: 1x 10Gbps port with XFP connector
• Traffic generation capabilities:
  • Wire-speed generation and analysis of layer 2~3 packets
  • Single / Burst / Multi-burst / Continuous packet generation
  • Frame sizes from 44 to 16388 bytes
  • Multiple address fields to create millions of unique flow
  • Supports Random IFG generation
  • Supports 802.3x flow control
  • Independent operation in each module
• X-Trailer® for data integrity verification and sequence checking
• Generation and response to ARP and Ping for layer 3 testing
• Extensive statistics
  • Real-time 64-bit counters that provide detailed statistics about every aspect of the packets being transmitted / received
  • Automatic generation of test results in tabular formats through the NuStreams software suites
• Professional software support for interactive and/or automated tests.

• Most cost-effective 10G test solution off the shelf
• Wire-speed generation and analysis of packets at speed up to 10Gbps
• Optimized testing
  • Validates functionality and performance of network and networking devices at various speed and load conditions
  • Performs deterministic and repeatable layer 2 to layer 3 tests for the most accurate test results
• Customizable test program ¡V The modules are supported by API for the development of customized test programs.
• Generic production test program with pre-defined templates is available to minimize development effort.

• NuLite (interactive functional testing)
• APMPT (all-purpose L2 mass production test program)
• NuAPI (Application Programming Interface) for C, C++ and TCL/TK

• Standard: IEEE 802.3ae-compliant 10GBASE-R (LAN)
• Interface: Pluggable XFP (ordered separately)
• Speed and Duplex Mode: 10Gbps / Full Duplex Only
• Preamble: 8 Bytes (Fixed)
• Frame Length: 40 ~ 16,384 Bytes(without CRC): Fixed / Increment / Decrement / Random / Loop
• Transmit Mode: Single / Burst / Multi Burst / Continuous
• Inter-frame Gap: 9.6 nSec. ~ 1.073 Sec.
  Unit: Packets/Sec, %Utilization, Random, Databits/Sec, Frame bits/Sec, Total bits/Sec, nSec, uSec, mSec, Sec
• Data Pattern: All zeros, All ones, Custom, Random, IP, UDP, UDP-RTP, TCP, ARP, RARP, ICMP, IPX, Pause, 555, AAAA, Incrementing byte, Incrementing word, Decrementing byte, Decrementing word, F0F0, 0F0F, FF00, FFFF0000, 0000FFFF, 8-F's 8-0's, 8-0's 8-F's
• Error Generation: CRC Error,IP Checksum Error,Undersize,Oversize
• Data Integrity Verification / Sequence Checking: Yes
• Source / Destination MAC Address: Fixed / Increment / Decrement / Random
• Source / Destination IP Address: Fixed / Increment / Decrement / Random
• IPv4 / IPv6 Support: IPv4
• VLAN Stacking: Up to 4 VLAN Tags
• Hardware Counters: Rx Frames, Rx Bytes, Undersize, Oversize, Broadcast, Multicast, Unicast, Pause, VLAN, MPLS, IPv4, CRC Error, DI Checksum Error, Serial No. Error, IP Checksum Error, Rx ARP Requests, Rx ARP Replies, Rx ICMP Ping Requests, Rx ICMP Ping Replies, RxUDF 0 ~ 7, Rx UDF Trigger, Tx Frames, Tx Bytes, Tx Trigger, Tx Queue, Tx ARP Requests, Tx ARP Replies
• RxUDF: Eight trigger states are provided for counting packets that appear in specific condition.
• QoS Testing: Up to 8 Priority Queues
• Line Performance: 10.3125 Gbps